13. May 2016

KUKA robot supports material supply

(image: ©KUKA) The collaboration between robot and operator ( Collaborative Robotics ) is one of the greatest efficiency potential in the Smart SMT Factory – and […]
22. September 2016

Robots and Operators

(image: © Kuka) We love to talk about the future, because while we do that, we can forget about today’s problems. Unfortunately when we start to […]
11. October 2016
ASM and KUKA: Robots will support material supply in electronics assembly

KUKA and ASM: Robots in the Smart #1 SMT Factory

(Image: ©Anna-Vaczi) Networking is the common thread in the development of the Smart #1 SMT Factory. Since this also applies to the relationships between technology leaders, […]
17. February 2017
Sawyer Robot in ASM SMT production

Automation potential for low-volume/high-mix production environments: Collaborative robotics in SIPLACE’s smart factory in Munich

(image: ASM Assembly Systems) In the overall production effectiveness (OPE) measurement I introduced in my previous post we have found a smart tool for the SIPLACE […]
22. February 2017

APEX 2017 – Collaboration at every turn

(image: Scoop) As the electronics manufacturing industry heads home from San Diego, many will reflect on the last three days of exhibition and conference with a […]
16. March 2017

Interfaces for RFID and robots in SMT lines

(image: copyright ASM) I covered the subject of interfaces for robots and operators in a previous blog post. After raising many questions in this regard during […]
18. April 2017

Smart factory: Why “being unfaithful” may make sense

(image: copyright Knapp / youtube) Electronics manufacturing is a very specialized job with highly complex tasks. As a result, the equipment market is dominated by SMT […]
28. April 2017

Everything moves faster than expected: Impressions from the Digital Factory trade fair in Hanover

(images: (c) Peter Kronfeld) Imagine you stand in front of a monitor and a software developer asks what information you would like to receive from a […]
18. May 2017
Alessandro Bonara, Fertigungsleiter bei ASM

Seven tips for using robotics in SMT production

11. July 2017

SMT Hybrid Packaging 2017: Warm-up event for the Productronica show this fall

The SMT Hybrid Packaging trade shows suffers during Productronica years. Manufacturers hold many innovations back until the fall. 2017 was no exception. Only a few exhibitors […]